Product-name：
ZDK600 Curing Automatic Brick Forming Machine
No.： Content：
List of theoretical production capacity
Specification of production
Pieces per mould
Piece/1 hour
Piece/8hour
Hollow Block
390*190*190
8*2
1440*2
11520*2
Multicellular Bricks
240*115*90
18*2
3240*2
25920*2
Standard Bricks
240*115*53
39*2
7020*2
56160*2
Technical Data
Forming Pieces
8pics/mould（390*190*190）18pics/mould（240*115*90）
Control system
PLC full auto computer control
Forming Pressure
1000T（500T*2）
Forming Cycle(s)
20-25s
Machine Installation Capacity(kw)
30kw
Environmentaland enery saving: The main feature of cellular block produced by FM120 High full auto block making machine 1、Can widely adopt many kinds of industrial wastes. It can save materials and it can adopt the industrial wastes as main materials such as (construction wastes, pit coal and rock mines and oil shale、coal gangue、fly ash、phosphateslag、AAS、 red mud of aluminum factory、oily sludge etc). It is the best choice of renewable natural resource. 2、Freeze-thaw resistance: after 50 times of freeze-thaw resistance test, it shows not only not affect in products quality also refects that the products has the feature of durability and quality level. The good quality of freeze-thaw resistance can fully meet the requirements of local building standards. 3、It has good feature of leak resistance and they are good materials for saving water in the agriculture and construction. Since it is leak proof and has low water absorbing capacity therefore it no need of the watering when in construction building. 4、It has high thermal impedance; the index of thermal impedance of solidified cellular block is over 50% standard, therefore the feature of heat preservation is better then fire bricks, It belongs to the type of saving energy products and also type of heat preserving and heat insulation building materials. 5、It can also save lands and water; it can use the oil shale to produce cellular blocks and it can widely adopt the local materials and be widely used in the national. The producing process standards make that the mixing materials and water is<18%, sand and crushed stone and water 54%, and the amount of block water ues 34%. 6、Out shape standard are same with the fire cellular bricks standard of GB13544-2000 national standard, out shape size 240*115*90(cellular blocks) or 240*115*53(standard blocks), Therefore it adapts to the requirements of building construction. 7、It has precise size and the solidified cellular blocks are formed by steel die, it has good foming surface and also well precise size. 8、This product has good quality; The quality of this solidified cellular block has good quality than the fire blocks. It has better press resistance with reach to 30% compared with the fire block. Its blind hole adhesive to the gray sand with holes surface makes the whole project better quality than the fire block with reach to 60%.
